IS-6000,7000, & 8000 Oak engraving tables are custom made for
each machine. The table frame ends are made from 1 5/8” X 4” thick oak with 1/4” oak plywood
insets. The 3 main oak rail are also 1 5/8 X 4” oak. The entire table frame is then connected
together with 3/8” bolts. This makes the table easy to put together with one wrench. The table
comes complete with two end sections and 3 cross members to hold the end pieces in place.
The 5” caster wheels swivel on all four corners so that it is easy to move the unit around for
cleaning, etc. The oak is construction grade and will have natural defects. The entire unit is
sanded and has a clear finish applied. The optional oak plywood bottom shelve, and oak
plywood control panel unit shelve can be purchase separately or as a complete package.
Oaktable6-8000 PDF
E-mail Tim King - Tim King
Features:
- Heavy oak wood with wheels
|
 |
 |
| Technical Data |
Options:
- Bottom shelf
- Shelf for Power panel
|
|
|
| Copyright Tim King Electronics, Inc. 2007 |
|
